500V LOW VOLTAGE SURGE ARRESTER
Product Picture
Using
Lighting Surge Arrester used to protect electrical equipment from high transient over-voltage hazards caused by lightning, and to limit the free-wheeling time, and often also limits the magnitude of the freewheeling of an electrical appliance. Arrester is also sometimes referred to as overvoltage protector, overvoltage limiter.
Condition of Use
● The ambient air temperatures is no higher than +40℃, no lower than -40℃.
● The altitude above sea level do not exceed 2000m.
● AC system frequency is 50Hz or 60Hz.
● AC voltage brought to bear on arrester for a long time does not exceed arrester's continuous operating voltage.
● Maximum wind speed does not exceed 35m/s.
● The earthquake intensity does not exceed 7 degrees.
Data Table
Type of arresters |
LAS - 001 |
LOZA |
Applied standard |
IEC 60099-1 |
IEC 61643-1 |
Type of surge arresters |
SIC with gaps |
ZnO gapless |
Rated voltage: Ur (kV) |
0.5 |
0.48 |
Maximum continuous operating |
- |
Ur |
Rated frequency (Hz) |
48 - 62 |
|
Norminal discharge class |
2.5 |
5 |
Housing material of surge arrester |
Distribution |
|
Line discharge class |
ABS |
Silicone |
Pollution level of creepage distance (Standard IEC 60071-2) |
IV |
|
Energy absorption capability (kJ/kV.Ur within one minute) |
- |
- |
Presure relief current (kArms) |
- |
- |
http://www.cowinelectrical.com/