Hamburger Pan

 

T-Shine manufactures custom hamburger bun baking pan. All hamburger bun baking pan are constructed of commercial grade materials, fabricated in various sizes and configurations to meet your baking needs, and are coated to your specifications.

 

The hamburger pan adopts deep drawn structure process: the mold is smooth, the appearance is beautiful; The thermal conductivity is good; Easy to clean, leaving no dead corners.

 

 

The top four sides of the inside of the hamburger pan are not coated, and the baking pan can be stacked without rubbing off the coating, which makes the food safer.

 

 

The product of the hamburger pan has a convex reinforcement design in the middle of the pan, which increases the robustness of the hamburger tray and makes the hamburger plate not easy to deform.

 

 

We use a super non-stick coating which is Durit, the product baking and coloring, good appearance, and the service life is 2-3 times that of ordinary non-stick coating.

 

Material	Al-steel
Structure	Deep drawn
Specification	3.5 inch 15 links 600 *400
	3.5 inch 24 links 738 *503
	4 inch 15 links 600 *400
	4 inch 24 links 738 *503
	TS12207067 12 links 530*380
	TS12211078 11 links 530*380
	TS12205016 12 links 530*380
	TS3200 15 links 600 *400

 

 

DURIT® High Level（Wine red）

THE NEW DURIT® HL is a coating system that can withstand 270 minutes of LGA wear testing. At the same time, the coating continues to maintain a high level of non-stick performance until the bottom of the coating.

 

Compared to the common two-layer PTFE coating on the market, this product uses an innovative fluoropolymer array, ceramic reinforced 3-layer PTFE system, which has greatly improved its long-lasting non-stick and abrasion resistance even when the coating is under high-strength use. Still maintain excellent non-stick.

 

http://www.t-shinebakeware.com/